9. LOGGING IN
In order to have full access to the user’s parameters and editing of database, the
person operating the balance, should log in as <ADMINISTRATOR> each time
they turn it on. The software enables the entry of 10 users with varying degrees of
authority.
The first login procedure
• While in the main window select <LOG IN>,available by pressing ,
or by pressing one of the function buttons to which the shortcut <LOG
IN> is assigned, or after pressing the button
, enter the users’
database and select the user <ADMIN>
• After selecting the < ADMIN> button and confirming the choice by
pressing
, the program asks you to enter the user’s password,
• You must enter „1111” and confirm by pressing ,
• The program returns to the main window,
• After the first login, you should first enter the users and assign the
appropriate access levels to them (procedures are described later in this
manual, see section 14).
The next time you log in, select a user from the list and enter the password.
After that the program starts working with the permissions for the selected
user.
If any user is logged in, the pictogram
is displayed.
Logout procedure
• In order to log out, select <NONE> from the list of available users
• The program returns to the main window, and the display shows no
logged-in user. (no logged-in user, no pictogram on the display).
To Next Page
Loading...
Need help?
General
