RADWAG MA 3Y User Manual

- 147 -
RV – Give program version
Format: RV <CR><LF>
Accessible responses:
RV_A_”x” <CR><LF>
- command understood, program
version given as a response
RV_I <CR><LF>
- command understood but not
accessible at this moment
x – program version (in between inverted commas)
Example:
Command:
RV <CR><LF> – give program number
Response:
RV_A_”r.3.0.9” – program version – ”r.3.0.9”
A – Set AUTOZERO function
Format: A_n <CR><LF>
Accessible responses:
A_OK <CR><LF>
- command carried out
A_E <CR><LF>
- an error occurred on command
carrying out, no parameter
available or incorrect format
A_I <CR><LF>
- command understood but not
accessible at this moment
n – parameter, decimal value determining autozero settings
n → 0 – autozero on
1 – autozero off
Caution:
Command changes settings for a current working mode.
Example:
Command:
A_1 <CR><LF> – turn autozero function on
Response:
A_OK <CR><LF> – autozero function is on
AUTOZERO function operates until it is turned off by A 0 command.
EV – Set ambient conditions state
Format: EV_n <CR><LF>
Accessible responses:
EV_OK <CR><LF>
- command carried out
EV_E <CR><LF>
- an error occurred on command

RADWAG MA 3Y Specifications

General

Brand	RADWAG
Model	MA 3Y
Category	Measuring Instruments
Language	English