RADWAG PUE C315

24
15. PERIPHERAL DEVICES
<P5.ducE> menu contains list of devices connecting with the scale.
15.1. Computer
<5.1.PC> submenu allows you to:
 select port to which the computer is connected,
 enable/disable continuous transmission,
 set frequency of printouts for continuous transmission.
15.1.1. Computer Port
 Enter <5.1.PC / 5.1.1.Prt> submenu.
 Press key, parameter values are displayed successively one by one:
nonE – none; rS1 – RS232 (1); rS2 – RS232 (2)*; UUF – Wireless
communication.
 Set the respective value, press key to confirm, next go to the home
screen.
*) – option.
15.1.2. Continuous Transmission
 Enter <5.1.PC / 5.1.2.Cnt> submenu.
 Press key, parameter values are displayed successively one by one:
nonE
Continuous transmission disabled.
CntA
Continuous transmission in basic unit.
Cntb
Continuous transmission in current/temporary unit.
 Set the respective value, press key to confirm, next go to the home
screen.
15.1.3. Printout Interval for Continuous Transmission
Parameter enabling you to set frequency of printout for continuous
transmission. Printout interval is set in seconds with 0.1 [s] accuracy within 0.1
[s] - 3600 [s] range.