RADWAG PUE C315

25
Procedure:
 Enter <5.1.PC / 5.1.3.Int> submenu, window for entering interval value is
displayed.
 Enter the value, press key to confirm, next go to the home screen.
15.2. Printer
15.2.1. Printer Port
Parameter enabling you to select port to which data is to be sent upon pressing
key.
Procedure:
 Enter <5.2.Prtr / 5.2.1.Prt> submenu.
 Press key, parameter values are displayed successively one by one:
nonE – none port selected; rS1 – RS232 (1); rS2 – RS232 (2)*;
UUF – Wireless communication.
 Set the respective value, press key to confirm, next go to the home
screen.
*) – option.
15.3. Additional Display
The weighing instrument can connect with additional WD displays.
15.3.1. Additional Display Port
 Enter <5.3.AdSP / 5.3.1.Prt> submenu.
 Press key, parameter values are displayed successively one by one:
nonE – none; rS1 – RS232 (1); rS2 – RS232 (2)*.
 Set the respective value, press key to confirm, next go to the home
screen.
*) – option.