Load the weighing pan with the ingredient no.2, wait for a stable weighing
result and press key.
Total mass value of ingredient no. 1 and 2 is displayed, now the „▲”
pictogram is displayed continuously.
In order to finish the process, press key, text <Prnt?> (Print?)
is displayed.
Press key, total mass value of all recorded weighings is printed on
a scale-connected printer.
Report example:
In order to print the report once again press key.
To exit "report printout mode" press key. As a result the home screen
of <Add> working mode is displayed and all the data get zeroed
automatically.
If the display capacity is exceeded (i.e. there is not enough
space for all the digits of the weighing result) <Hi> error
is displayed. In such a case either remove the ingredient
from a weighing pan and finish the totalising process
or place load of a lower weight value on the weighing pan.
To Next Page
Loading...
