Document ID: RDWR-ALOS-V2815_IG0203 63
Chapter 5 – Maintenance and Software Upgrade
This chapter describes how to maintain your device, how to upgrade your device, licenses, and
includes the following topics:
• Rebooting Devices, page 63
• Managing Device Configuration Files, page 64
• Downloading Software, page 64
• Upgrading the Alteon Application Switch, page 65
• Licensing Mechanism, page 66
Note: For more information on licenses, contact Radware Technical Support.
Rebooting Devices
For general information on rebooting the Alteon devices, see the Alteon Application Switch Operating
System Command Reference.
This section includes specific rebooting procedures for the following:
• Rebooting vADCs, page 63
Rebooting vADCs
Rebooting a vADC is not a system-wide event; it is a singular event affecting only the target vADC.
vADC reboot can be performed either by the vADC Administrator or the Global Administrator.
For more information on the vADCs and ADC-VX, see the Alteon Application Switch Operating
System Application Guide.
To reboot a vADC in the vADC Administrator environment
>> vADC 1 - Main# /boot
------------------------------------------------------------
Boot Options Menu]
conf - Select config block to use on next boot
reset - Reset switch
>> vADC 1 - Boot Options# reset
Confirm reset [y/n]: y
To Next Page
Loading...
Need help?
General