APSolute Vision Installation and Maintenance Guide
12 Document ID: RDWR_APSV_V400_IG1808
Safety Instructions
The following safety instructions are presented in English, French, and German.
Safety Instructions
CAUTION
A readily accessible disconnect device shall be incorporated in the building installation wiring.
Due to the risks of electrical shock, and energy, mechanical, and fire hazards, any procedures that
involve opening panels or changing components must be performed by qualified service personnel
only.
To reduce the risk of fire and electrical shock, disconnect the device from the power line before
removing cover or panels.
The following figure shows the caution label that is attached to Radware platforms with dual power
supplies.
Figure 1: Electrical Shock Hazard Label
DUAL-POWER-SUPPLY-SYSTEM SAFETY WARNING IN CHINESE
The following figure is the warning for Radware platforms with dual power supplies.
Figure 2: Dual-Power-Supply-System Safety Warning in Chinese
Translation of Dual-Power-Supply-System Safety Warning in Chinese:
This unit has more than one power supply. Disconnect all power supplies before maintenance to
avoid electric shock.
SERVICING
Do not perform any servicing other than that contained in the operating instructions unless you are
qualified to do so. There are no serviceable parts inside the unit.
HIGH VOLTAGE
Any adjustment, maintenance, and repair of the opened instrument under voltage must be avoided
as much as possible and, when inevitable, must be carried out only by a skilled person who is aware
of the hazard involved.
Capacitors inside the instrument may still be charged even if the instrument has been disconnected
from its source of supply.
To Next Page
Loading...
General