Document ID: RDWR_APSV_V400_IG1808 67
CHAPTER 4 – MAINTENANCE AND
UPGRADE
This chapter describes maintenance procedures and how to upgrade platforms and licenses. This
chapter includes the following topics:
• Shutting Down and Rebooting, page 67
• Managing Configuration Files, page 67
• Recovering the “radware” User Password, page 67
• Upgrading the APSolute Vision Server and APSolute Vision Server with APM Server VA, page 68
• Upgrading Licenses, page 69
• Migrating APSolute Vision from the OnDemand Switch VL Platform to the OnDemand Switch VL2
Platform, page 70
• Troubleshooting Fan Failure, page 71
• Replacing a Power Supply, page 71
Caution: Unless specifically stated otherwise, downgrading Radware platforms is not supported.
Downgrading a platform may cause loss of configuration and unexpected behavior.
Shutting Down and Rebooting
To shut down an APSolute Vision server
> Using the CLI, at the prompt enter: shutdown
To reboot an APSolute Vision server
> Using the CLI, at the prompt, enter: reboot
Managing Configuration Files
You should always save existing configurations to ensure off-device configuration backup.
Refer to the APSolute Vision User Guide, which provides details about APSolute Vision server backup
and restore (using CLI) and backup using a scheduled task in APSolute Vision client GUI.
Recovering the “radware” User Password
If you forget your user password, you can reset the default password for the "radware" user.
To Next Page
Loading...
General