APSolute Vision Installation and Maintenance Guide
Specifications
76 Document ID: RDWR_APSV_V400_IG1808
Serial Cable Pin Assignment
The following table lists the pinout for the serial console port.
Table 7: Serial Port Pinout
Standard PC DE-9
1
Serial Port (DTE)
1 – Commonly referred to as DB-9.
DE-9F to DE-9M Straight
Cable
Radware Device
ASCII Port (DCE)
OnDemand Switch VL
CONSOLE Port
DE-9M Pin Signal DE-9F Pin DE-9M Pin DE-9F Pin Signal
8P8C
2
Pin
2 – Commonly referred to as RJ-45. On the OnDemand Switch VL platforms, the console
port uses an 8P8C connector. Radware supplies a RJ-45-to-DE-9 adapter cable to
connect the console port of the platform to a console PC.
Signal
1 DCD 1 1 - - 1 RTS/CTS
2RxD22 2RxD2DTR
3 TxD 3 3 3 TxD 3 TxD
4 DTR [Data
Terminal
Ready]
44 --4GND
5 GND 5 5 5 GND 5 DCD
6DSR
[Data Set
Ready]
66 --6RxD
7RTS
[Request
To Send]
77 --7DSR
8CTS
[Clear To
Send]
88 --8CTS
9RI [Ring
Indicator]
99 ----
To Next Page
Loading...