APSolute Vision Installation and Maintenance Guide
Platform Installation
46 Document ID: RDWR_APSV_V400_IG1808
Note: For APM, if the VM is configured with less than 2 hard disks and 4 network adapters, the
installation will be aborted.
The machine will reboot during the installation process.
24. When the installation procedure seems to have stopped, select View > Text Consoles >
Serial 1 to switch to the Serial 1 console.
25. When the installation completes, a log in prompt will display.
26. Log in as radware (default password radware) to run first time wizard and to set the IP
address.
Note: The ISO image can be disconnected from the VM after successful installation.
Click Disconnect to disconnect the ISO image.
To Next Page
Loading...