Radwin RW 2000 Series User Manual

Page 16
June 2023
Corporate Headquarters | T. +972.3.766.2900 | E. sales@radwin.com | www.radwin.com
RT‐A(HBS)/Hub
RT‐B(HSU)Client
• Only when power input on AC or DC PoE is lost or disconnected on the client
site (not supported on hub site).
• On PtP and PtMtP (up to 16 CPEs).
For proper functionality of Dying Gasp, please make sure to use one of the following
optional PoEs in the next table:
PN
Name
Description
RW-9921-
101x
POE/AC/1000M
AC input 100-240VAC nominal range 90-264VAC
max rang (indoor)
See PoE datasheet for country specific power plug
RW-9921-
008x
OPOE/AC/GBE/OC
100-240VAC nominal range. 90-264VAC max
range (outdoor)
See PoE datasheet for country specific power plug
RW-9921-
1049
POE/AC/GBE/HP/IDA
(India)
100-240VAC nominal range. 90-264VAC max
range (indoor)
RW-9921-
400x
POE/AC/2.5/GBE
100-240VAC nominal range. 90-264VAC max
range (indoor)
See PoE datasheet for country specific power plug
RW-9921-
0110
OPOE/DC/GBE
10-60 VDC (outdoor)
RW-9921-
2059
POE/DC/GBE/ET/10-60
10-60VDC (indoor)
Worldwide single PN products
Some RADWIN products include a word-wide single part number.
These products include a built-in GPS/GNSS receiver. The radio’s identify their location from
GNSS, and determine the country in which they are located and the regulation that applies
in that country. Subsequently, a single PN is available for each HW version of the radio,
without needing to create multiple PNs (dedicated PN for each regulation). The same radio
device can be transferred from one regulation zone to another.

Radwin RW 2000 Series Specifications

General

Brand	Radwin
Model	RW 2000 Series
Category	Network Router
Language	English