Rae RAEGuard 2 PID - Page 43

RAEGuard 2 PID User’s Guide
38
Change Password (Advanced Mode)
You can change the four-digit password for accessing Basic Mode.
The default basic password is: 1111
The advanced password is: 1250
Note: You cannot change the password for accessing Advanced
Mode.
1. Press [+] to step through all 10 numerals (0 to 9).
2. Press [-] to advance to the next digit. The next digit to the
right flashes.
Repeat this process until all four digits of the new password
are entered.
3. Press [MODE] to register the selection.
4. Press [+] to save the new password, [MODE] to return to
editing the password, and [-] to cancel the change.
The new password is saved, and the RAEGuard 2 PID exits back
to the “Monitor Setup” menu.