EAGLE™
User Manual
At the beginning of the billing period, the Step 1 price will be in effect. When the
threshold usage (shown below the step, in kWh) is reached, then the Step 2 price
comes into effect. The bar graph shows how much usage is left before the higher price
is reached.
The dates for the current billing cycle are shown in grey in the upper left of the pricing
panel.
Note the small green dot that will appear at the top left corner of the “Usage” page. This
indicates when an update to the usage has been received from the meter.
In the centre of the page is the estimated cost per hour. This is calculated from the
current price per kWh multiplied by the current rate of energy consumption. Below this
is the “Fast Update” button. Clicking this button will cause your EAGLE™ to ask the
meter for faster updates. Once this is done, the faster rate will be in effect for 60
seconds.
To Next Page
Loading...