RAM 1500 2021 - Page 110

108 GETTING TO KNOW YOUR INSTRUMENT PANEL
LaneSense — If Equipped
The instrument cluster display displays the current
LaneS
ense system settings. The information
displayed depends on LaneSense system status
and the conditions that need to be met
Ú page 127.
Fuel Economy
Push and release the up or down ar row
button until the Fuel Economy menu item is
h
i
g
h
lighted in the instrument cluster display. Push
and hold the OK button to reset Average Fuel
Economy.
 Current Fuel Economy
 Average Fuel Economy
 Range To Empty
Trip Info
Push and release the up or down ar row
button until the Trip menu item is highlighted in the
i
n
s
t
rument cluster display. Push and release the
right or left arrow button to enter the
su
bmenus of Trip A and Trip B. The Trip A or Trip B
infor
mation will display the following:
 Distance
 Average Fuel Economy
 Elapsed Time
Push and hold O
K
b
u
tton to reset all information.
Stop/Start — If Equipped
Push and release the up or down ar row
button until the Stop/Start icon/title is highlighted
in t
he instrument cluster display. The screen will
display the Stop/Start status.
Trailer Tow — If Equipped
Push and release the up or down ar row
button until the Trailer Tow menu item is
high
lighted in the instrument cluster display. Push
and release the right or left arrow button to
cy
cle through the following trailer tow information:
 Trip (trailer specific) Distance: Push and hold
the OK button to reset the distance.
 Integrated Trailer Brake Module (ITBM):
 Braking Output
 Trailer Type
 ITBM Gain
 Trailer Light Check: Push and hold the OK
button to begin the Trailer Light Test sequence
Ú page 205.
 Trailer Tire Pressure Monitoring: The Instrument
Cluster Display will display the Trailer Tire Pres-
sure for a connected trailer with sensors that
m
atc
h the active trailer profile. When a low tire
is present, the low tire value will be displayed in
red, and the affected low tire will have a red
glow. “Trailer Tire Low“ will be displayed on the
center bottom of the Instrument Cluster Display
screen.
Audio
Push and release the up or down ar row
button until the Audio Menu icon/title is
high
lighted in the instrument cluster display. This
menu will display the audio source information,
including the Song name, Artist name, and audio
source with an accompanying graphic.
Phone Call Status
When a call is incoming, a Phone Call Status
p
op-u
p will display on the screen. The pop-up will
remain until the phone is answered or ignored.
NOTE:
The call status will temporarily replace the
prev
ious media source information displayed on
the screen. When the pop-up is no longer
displayed, the display will return to the last used
screen.