RAM 1500 2021 - Page 408

406 SERVICING AND MAINTENANCE
5. Disconnect the internal lamp wiring harness
connector from the high beam bulb.
6. Rotate the bulb counterclockwise a quarter
tur
n to unlock the bulb from the lamp.
7. Pull the bulb straight out from the housing.
8. R
e
verse the procedure for installation of new
b
u
l
b and cover.
Front Park And Turn
See below steps to replace:
1. O
pen the hood.
2. D
isconnect and isolate the negative battery
cab
le.
3. Locate the park and turn socket, which can be
foun
d on the back side of the headlamps.
Park And Turn Socket
4. Reach behind the headlamp and unlock the
par
k and turn socket from the lamp by rotating
counterclockwise a quarter turn.
5. Pull the bulb straight out from the housing.
6. S
eparate the bulb from the socket without
twi
sting.
7. Reverse the procedure for installation of new
bul
b and covers.
Side Marker Lamp
See below steps to replace:
1. O
pen the hood.
2. D
i
sconnect and isolate the negative battery
c
a
b
le.
3. Locate the side marker lamp, which can be
foun
d on the back side of the headlamps.
Side Marker Lamp
4. Disengage the side marker socket by rotating
coun
terclockwise a quarter turn.
5. Pull the socket and bulb straight out from the
hous
ing.
6. Separate the bulb from the socket without
twi
sting.
7. Reverse the procedure for installation of new
bul
b and covers.
CAUTION!
 Do not contaminate the bulb glass by touching
it with your fingers or by allowing it to contact
other oily surfaces. Shortened bulb life will
result.
 Always use the correct bulb size and type for
replacement. An incorrect bulb size or type
may overheat and cause damage to the lamp,
the bulb socket, or the lamp wiring.