To Next Page

To Previous Page

Configuring the R&S TSMA6

R&S

TSMA6

29Getting Started 4900.8040.02 ─ 07

WLAN

1. Via a tablet or smartphone, you have to establish a WLAN connection to

R&S TSMA6 WLAN access point.

a) Search for a TSMA6 WLAN network. The WLAN access point on the

R&S TSMA6 starts automatically by default during the boot process of the

device.

NOTE: You can switch off this behavior.

b) Connect your tablet or smartphone with the TSMA6 WLAN network. The

required login information can be found on a label on the bottom side of

the R&S TSMA6.

WLAN-Access point SSID: default TSMA6-xxxxxx (xxxxxx is the serial

number of this specific R&S TSMA6)

Default key: instrument

Note:

The SSID and the key are configurable via the web GUI.

The WLAN connection between the tablet or smartphone and the

R&S TSMA6 device is established.

2. On the tablet or smartphone, start a web browser and enter the following URL:

http://192.168.137.1/

The configuration web GUI of the R&S TSMA6 is started.

LAN

1. Connect the R&S TSMA6 LAN port with the host PC port.

2. Use the R&S TSMA6 default IP settings, that is, the DHCP client. The

R&S TSMA6 and the remote host PC automatically negotiate the IP address.

Alternatively, use the fixed address.

3. Start a web browser via the R&S TSMA6 web GUI and enter the following

URL:

http://TSMA6-<xxxxxx>.local (xxxxxx is the serial number of this specific

R&S TSMA6.)

Local access from the R&S TSMA6 and Windows Explorer

► Open Internet Explorer using mouse, keyboard and monitor. The R&S TSMA6

web GUI opens automatically. If not, type the following URL:

http://localhost

Accessing the R&S TSMA6

R&S TSMA6 Getting Started

Other manuals for R&S TSMA6