To Next Page

To Previous Page

Configuring the R&S TSMA6

R&S

TSMA6

28Getting Started 4900.8040.02 ─ 07

6 Configuring the R&S TSMA6

Network environment

Before connecting the product to a local area network (LAN), consider the follow-

ing:

●

Install the latest firmware to reduce security risks.

●

For internet or remote access, use secured connections if applicable.

●

Ensure that the network settings comply with the security policies of your com-

pany. Contact your local system administrator or IT department before con-

necting your product to your company LAN.

●

When connected to the LAN, the product may potentially be accessed from

the internet, which may be a security risk. For example, attackers might mis-

use or damage the product.

6.1 Accessing the R&S TSMA6

There are different ways to control measurements on the R&S TSMA6.

●

Local operation

To use the R&S TSMA6 as an ordinary PC, an external monitor, mouse and

keyboard have to be connected to the R&S TSMA6.

●

Remote access

The remote access to the R&S TSMA6 can be realized via the following

options.

– Using the web GUI of the R&S TSMA6 (see Chapter 6.1.1, "Start the

R&S TSMA6 Web GUI", on page 28).

– Establish a remote desktop connection (via LAN/WLAN) (see Chap-

ter 6.1.2, "Establish a Remote Desktop Connection", on page 30).

6.1.1 Start the R&S TSMA6 Web GUI

To start the R&S TSMA6 web GUI via a remote PC, three possible ways are

available.

Accessing the R&S TSMA6

R&S TSMA6 Getting Started

Other manuals for R&S TSMA6