R&S ZNLE Series - Stimulus Softtool

VNA GUI reference
R&S
®
ZNL/ZNLE
310User Manual 1178.5966.02 ─ 20
Table 10-1: Function keys and softtools
Key Keyboard
Shortcut
Related Soft-
tool
Action
[Freq] Alt + Shift + J Stimulus soft-
tool
Selects an input field corresponding to the fre-
quency or span of the active channel's current
sweep type.
Activates the corresponding tab on the "Stimulus"
softtool.
[Span] Alt + Shift + K
[Scale] Alt + Shift + C Scale softtool Default
[Bw Avg Power] Alt + Shift + L Bw Avg Power
softtool
Default
[Sweep] Alt + Shift + M Sweep Softtool Default
[Trace] Alt + Shift + F Trace softtool Default
[Trig] Alt + Shift + S Sweep Softtool Activates the first active input field on the "Trigger"
tab
[Meas] Alt + Shift + A Meas softtool Default
[Format] Alt + Shift + W Format softtool Default
[Display Lines] Alt + Shift + B Display Lines
softtool
Default
[Mkr] Alt + Shift + G Marker Settings
softtool
Default
[Mkr->] Alt + Shift + H Marker Search
softtool
Default
[Cal] Alt + Shift + D Cal softtool Default
[Channel] Alt + Shift + E Channel soft-
tool
Default
[Offset Embed] Alt + Shift + R Offset Embed
softtool
Default
10.2 Stimulus softtool
On the "Stimulus" softtool, you can access to the stimulus parameters of the active
channel. If the active trace is represented in Time Domain, it also allows you to config-
ure the "observation interval".
Access: [Freq] or [Span] hardkey
Stimulus softtool