R&S ZNLE Series - Trying out Spectrum Mode

Getting Started
R&S
®
ZNL/ZNLE
64User Manual 1178.5966.02 ─ 20
The "IQ Analyzer" channel setup displays the real and imaginary signal parts in
separate windows.
To display the MultiView tab
An overview of all active channel setups is provided in the "MultiView" tab. This tab is
always displayed if more than one channel setup is active and cannot be closed.
► Tap the "MultiView" tab.
Figure 4-10: The "MultiView" tab
4.3.6
Trying out spectrum mode
If the spectrum analysis option R&S ZNLxx-B1 is installed, you can use the instrument
for Spectrum measurements. The following chapters describe some basic tasks in
spectrum mode.
For instruments R&S ZNL14 and R&S ZNL20 with serial numbers below 101200, the
B1 option and other dependent options are not available.
A spectrum analysis option for the R&S ZNLE is not available.
● Measuring a basic signal.........................................................................................65
● Displaying a spectrogram........................................................................................67
● Setting and moving a marker.................................................................................. 68
● Displaying a marker peak list.................................................................................. 69
Trying out the instrument