R&S ZNLE Series - System:communicate:printer:enumerate[:Next]; System:communicate:printer:select<DI

Command reference
R&S
®
ZNL/ZNLE
598User Manual 1178.5966.02 ─ 20
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]
This command queries the name of available printers.
You have to use SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt on page 597
for this command to work properly.
Manual operation: See "Printer Name" on page 112
SYSTem:COMMunicate:PRINter:SELect<di> <Printer>
This command selects the printer that processes jobs sent by the R&S ZNL/ZNLE.
Use HCOPy:DESTination<di> to select another output destination.
Suffix:
<di>
.
1..n
Irrelevant.
Parameters:
<Printer> String containing the printer name.
Use
•SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt
on page 597and
•SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]
on page 598
to query all available printers.
*RST: NONE
Manual operation: See "Printer Name" on page 112
11.3.3.5 Storing measurement results
The following commands can be used to store the results of a measurement.
11.3.3.6 Examples: managing data
● Storing data...........................................................................................................598
● Loading data......................................................................................................... 599
● Storing instrument settings....................................................................................600
● Loading instrument settings.................................................................................. 600
● Printing to a file..................................................................................................... 600
● Printing on a printer...............................................................................................600
● Storing multiple graphical measurement results to a PDF file.............................. 601
Storing data
MMEM:MSIS 'C:'
//Selects drive C: as the default storage device.
//-----Connecting a network drive--------
Common instrument commands