Data management
R&S
®
ZNL/ZNLE
112User Manual 1178.5966.02 ─ 20
Destination: File ← Destination
Stores the printout to a file in the selected format. The filename is queried at the time of
storage, or a default name is used (see Suppress File Name Dialog).
Multiple windows can only be printed to a file in PDF format. If you select an image file
format, the content setting is automatically set to Print Screenshot. Page settings are
not available for image files; however, you can configure the colors used for the
screenshot (see Chapter 6.3.1.5, "Print color settings", on page 114).
Remote command:
HCOPy:DEVice:LANGuage on page 593
Destination: Clipboard ← Destination
Copies the printout to the clipboard. Since only single pages can be copied, only
screenshots can be copied to this destination, not multiple windows (see Chap-
ter 6.3.1.1, "Print content settings", on page 105). Page settings are not available; how-
ever, you can configure the colors used for the screenshot (see Chapter 6.3.1.5, "Print
color settings", on page 114).
If you select the clipboard as the printing destination, the content setting is automati-
cally set to Print Screenshot.
Remote command:
HCOP:DEST1 'SYSTem:COMMunicate:CLIPboard'
Destination: Printer ← Destination
Sends the printout to the printer selected from the Printer Name list.
Remote command:
HCOP:DEST1 'SYSTem:COMMunicate:PRINter'
Suppress File Name Dialog
If the Destination is a file, the file selection dialog box is not displayed. Instead, the
default storage location and filename are used.
(C:\Users\Public\Documents\Rohde-Schwarz\ZNL\user
\ZNL_ScreenShot_<date and time>).
Printer Name
Defines the printer to print to if a printer is selected as the Destination.
Any printers detected in the network are listed for selection.
Tip: the printout can also be stored in a print file using the selected printer driver, see
"Print to file" on page 112.
Remote command:
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT] on page 598
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt on page 597
SYSTem:COMMunicate:PRINter:SELect<di> on page 598
Print to file
If a printer is selected as the Destination, use this option to store the data in a .prn file
using the selected printer driver.
Creating screenshots of current measurement results and settings
To Next Page
Loading...
