R&S ZNLE Series - Calculate<Chn>:Marker:mpeak:threshold:state; Calculate<Chn>:Marker:search:bfilter:result[:State]; Calculate<Chn>:Marker<Mk>:Name; Calculate<Chn>:Marker<Mk>:Reference:name

Command reference
R&S
®
ZNL/ZNLE
696User Manual 1178.5966.02 ─ 20
Parameters:
<Value> Threshold value
The unit is derived from the active trace format and cannot be
modified. Changing the trace format resets the threshold to a
format-specific default value.
Manual operation: See "Threshold Settings" on page 465
CALCulate<Chn>:MARKer:MPEak:THReshold:STATe <Boolean>
Activates or deactivates the threshold for multiple peak searches.
Use CALCulate<Chn>:MARKer:MPEak:THReshold to set the threshold value.
Suffix:
<Chn>
.
Channel number used to identify the active trace
Parameters:
<Active> Boolean
Manual operation: See "Threshold Settings" on page 465
CALCulate<Chn>:MARKer<Mk>:NAME <MarkerName>
CALCulate<Chn>:MARKer<Mk>:REFerence:NAME <MarkerName>
Defines a name for the related marker (see "Marker addressing" on page 681). The
marker doesn't have to be created before, the name can be assigned in advance.
Suffix:
<Chn>
.
Channel number used to identify the active trace
<Mk> Marker number (ignored for reference markers)
Parameters:
<MarkerName> Marker name (string parameter)
*RST: 'M1' for marker no. 1 etc.
Example: Suppose that the active channel setup contains an active trace
no. 1.
CALC:MARK:NAME '&$% 1'; :CALC:MARK ON
Create marker 1 named "&$% 1" and display the marker .
CALC:MARK:REF ON
CALC:MARK:REF:NAME 'Reference'
Display the reference marker and rename it "Reference".
Manual operation: See "Marker Name" on page 452
CALCulate<Chn>:MARKer:SEARch:BFILter:RESult[:STATe] <Boolean>
Shows or hides the bandfilter search results in the diagram area.
Suffix:
<Chn>
.
Channel number used to identify the active trace
VNA command reference