R&S ZNLE Series - Checking the System Configuration

To Next Page

To Previous Page

Command reference

R&S

ZNL/ZNLE

617User Manual 1178.5966.02 ─ 20

• <version>

• <LXIClass>

• <ComputerName>

• <MACAddress>

• <IPAddress>

• <AutoMDIX>

SYSTem:LXI:LANReset

This command resets the LAN configuration, as well as the "LXI" password and instru-

ment description.

Manual operation:

See " LXI Reset" on page 161

SYSTem:LXI:MDEScription <Description>

This command defines the "LXI" instrument description.

Parameters:

<Description> String containing the instrument description.

SYSTem:LXI:PASSword <Password>

This command defines the "LXI" password.

Parameters:

<Password> String containing the password.

Return values:

Manual operation: See "LAN Password" on page 161

SYSTem:REVision:FACTory

Resets the response to the REV? query to the factory default value.

Usage:

Event

11.3.4.6 Checking the system configuration

The following commands are required to check the system configuration on the

R&S ZNL/ZNLE.

Useful commands for obtaining system information described elsewhere:

●

DIAGnostic:SERVice:SINFo? on page 622

Common instrument commands

Other manuals for R&S ZNLE Series