R&S ZNLE Series - Page 619

Command reference
R&S
®
ZNL/ZNLE
619User Manual 1178.5966.02 ─ 20
<code>: code of the component
<revision>: revision of the component
<subrevision>: subrevision of the component
Example:
DIAG:SERV:HWIN?
Queries the hardware information.
"FRONTEND|100001/003|1300.3009|03|01|00|00",
"MOTHERBOARD|123456/002|1300.3080|02|00|00|00",
...
Usage: Query only
DIAGnostic:SERVice:VERSinfo?
This command queries information about the hardware and software components.
Return values:
<Information> String containing the version of hardware and software compo-
nents including the types of licenses for installed options.
Example:
DIAG:SERV:VERS?
Queries the version information.
Response:
Usage: Query only
SYSTem:ERRor:CLEar:ALL
This command deletes all contents of the "System Messages" table.
Example:
SYST:ERR:CLE:ALL
SYSTem:ERRor:CLEar:REMote
This command deletes all contents of the "Remote Errors" table.
Note: The remote error list is automatically cleared when the R&S ZNL/ZNLE is shut
down.
Example:
SYST:ERR:CLE:REM
Manual operation: See "Display Remote Errors" on page 158
SYSTem:ERRor:LIST? [<MessType>]
This command queries the error messages that occur during R&S ZNL/ZNLE opera-
tion.
Query parameters:
<MessType> SMSG | REMote
SMSG
(default) Queries the system messages which occurred during
manual operation.
Common instrument commands