R&S ZNLE Series - Page 865

Command reference
R&S
®
ZNL/ZNLE
865User Manual 1178.5966.02 ─ 20
Setting parameters:
<PmclFile> String parameter specifying the name and directory of the cre-
ated power meter correction list file. The file extension *.pmcl
is mandatory.
If no path is specified, the analyzer searches the current direc-
tory, to be queried with MMEMory:CDIRectory?
*RST: n/a
Example: See SOURce:POWer:CORRection:TCOefficient[:STATe]
Usage: Setting only
Manual operation: See "Recall... / Save..." on page 516
MMEMory:STORe:LIMit
<TraceName>, <LimLineFile>
Saves the limit lines associated to a specified trace to a limit line file. Limit lines are
created using the CALCulate<Chn>:LIMit... commands.
Setting parameters:
<TraceName> Name of an existing trace in the active channel setup (string
parameter) for which a limit line definition exists.
<LimLineFile> String parameter to specify the name and directory of the cre-
ated limit line file. The default extension (manual control) for limit
line files is *.limit, although other extensions are allowed.
If no path is specified the analyzer searches the current direc-
tory, to be queried with MMEMory:CDIRectory?
Example: See MMEMory:LOAD:LIMit
Usage: Setting only
Manual operation: See "Recall... / Save..." on page 437
MMEMory:STORe:MARKer <AsciiFile>
Saves the values of all markers to an ASCII file.
Setting parameters:
<AsciiFile> String parameter to specify the name and directory of the cre-
ated ASCII file. The default extension (manual control) for
marker files is *.txt, although other extensions are allowed.
If no path is specified the analyzer searches the current direc-
tory, to be queried with MMEMory:CDIRectory?
VNA command reference