en-10
4 SPECIFICATION
4.7 CUTTING PERFORMANCE __________________________________________
44 cuts per metre at 12km/hr with 11 knife cylinders.
32 cuts per metre at 12km/hr with 8 knife cylinders.
24 cuts per metre at 12km/hr with 6 knife cylinders.
16 cuts per metre at 12km/hr with 4 knife cylinders.
4.8 CUTTING PERFORMANCE (AREA) ____________________________________
3.2 hectares/hr .at 12km/hr.(8 acres/hr at 7.5 mph)
10% allowance is included for normal overlaps and turning at the end of each cut.
To Next Page
Loading...
