Ransomes Commander 3520 - Maintenance and Lubrication; Maintenance and Lubrication Chart

en-46
8 MAINTENANCE & LUBRICATION
8.1 MAINTENANCE & LUBRICATION CHART _________________________________
MAINTENANCE AND LUBRICATION CHART
Interval Item Section
First 50 hours
 Change Engine Oil
 Check Engine Oil Filter
8.1
Daily
10 hours
 Check Engine Oil Level.
 Check / Clean Air Filter Element
 Check / Clean Bug Screen / Radiator
 Check Coolant Level
 Check Hydraulic Fluid Level
 Check Tyre Pressure
 Check Engine Bay for Debris
7.4
7.4
4.2
Weekly
40 hours
 Check Battery Condition
 Check Hydraulic Fittings For Tightness
 Check Nuts & Bolts For Tightness
8.7
Every 100
hours
 Check & Clean Air Filter Element*
8.5
Every 200
hours
 Change Engine Oil & Oil Filter
8.1
Every 400
hours
 Change Air Filter Element*
 Replace Inline Fuel Filters
 Replace Fuel Filter Cannister
8.6
End of season
or 1000 hours
 Change Hydraulic Oil & Filters
 Drain & Replace Engine Coolant
8.3
8.8
Lubricate all Grease fittings with Shell Darina R2 equivilent Grease Weekly 8.2
* Check more often in dirty conditions
IMPORTANT
Refer to Engine Manufacturers Manual for Additional Engine Maintenance Procedures
FLUID REQUIREMENTS
Quantity Type
A Engine Oil (with filter) 9.5 Litres 10W 30
B Hydraulic Oil (with
filter)
52 Litres Shell Tellus 46 to ISO VG46 or Equivilant
C Radiator Coolant 6.8 Litres 50% Anti-Freeze
D Fuel 54 Litres No 2-D (ASTM D975) Diesel