en-33
6 CONTROLS
6.19 4WD REVERSE _________________________________________________
To reverse in 4 Wheel Drive, switch "C" should be
engaged & illuminated.
Using the heal of the left foot depress switch "H"
Pushing down the rear plate of the traction pedal
with the right foot moves the machine in reverse.
The further the pedal is depressed the faster the
machine will move. The pedal automatically
returns to the neutral position when foot pressure
is released.
To disengage 4 Wheel Drive reverse,
remove left heal from switch "H".
Analogue Display
Digital Display
To Next Page
Loading...
