4 | Transport
80.06.083_iCombi Pro-iCombi Classic_IM_V01_en-US 25 / 84
4. Lift the device using the lifting straps. Observe the minimum number of
persons required to lift and transport the device according to the weight of
the device.
5. Transport the device using the lifting straps and place it on the designated
installation surface.
6. Push the lifting strap buckles down and pull the lifting straps out of the side
slots.
7. Push the seal back into the groove provided in the base frame.
>> The device is set down on the designated installation surface and is ready
for setup and installation.
To Next Page
Loading...