Rational CombiMaster Plus XS User Manual

4 | Transport
22 / 84 80.06.083_iCombi Pro-iCombi Classic_IM_V01_en-US
a The device feet are positioned in the foam rubber frame of the transport
pallet.
1. Transport the device to the installation site with the transport pallet. Dur-
ing transport, look out for protruding components on the underside of the
device.
>> The device is on the designated installation surface and is ready for setup
and installation.
4.3 Transport without transport pallet with lift truck
NOTE
Transport without transport pallet with lift truck
Do not transport the device without protection with a lift truck. Use a
wooden pallet or a wooden beam as protection, for example.
NOTE
Device size XS GN: Damage to the device due to incorrect lifting
During transport, make sure that the air filter box and the USB port remain
intact.
Required door width without transport pallet
Device size XS 6 half
size
6 full
size
10 half
size
10 full
size
20 half
size
20 full
size
x (mm) 630 845 1045 845 1045 925 1145
x (inch) 24 3/4 33 1/4 41 1/8 33 1/4 41 1/8 36 3/8 45 1/8
4.3.1 Transport tabletop devices without pallet with lift truck
a The packaging material is removed.
a The device rests on the device base frame.
a To avoid scratches on the underside of the device, provide protection
against damage to the device.
1. Slide the seal upwards out of the groove in the base frame.
2. Place the protection from damage on the lift truck.
3. Use the lift truck to lift the device on the lifting points.
4. Transport the device onto the designated installation surface.

Rational CombiMaster Plus XS Specifications

General

Brand	Rational
Model	CombiMaster Plus XS
Category	Convection Oven
Language	English