1 | Introduction
6 / 84 80.06.083_iCombi Pro-iCombi Classic_IM_V01_en-US
1 Introduction
1.1 Information on this manual
This document is a preliminary version of the installation instructions. Please
note the respective version and date.
This document is part of the device. Read this manual before carrying out the
installation. The manual enables safe handling of the unit and correct installa-
tion.
The images in this manual are examples only and may differ from the device.
This manual is valid for the following devices:
n
LM1: iCombi Pro
n
LM2: iCombi Classic
n
LM2: CombiMaster Plus XS
Storage
Keep the installation manual and operating manual close to the unit. During
service work, the installation manual must be accessible to specialist personnel
authorized by the manufacturer at all times.
Transfer
Pass this installation manual on to the owner of the device.
Circuit diagram
The starter kit includes a circuit diagram of the device. If the circuit diagram is
lost, it can be found in the service parts catalog and the TechAssistant app. The
TechAssistant app is available in the App Store and on Google Play.
Explanation of symbols
a A requirement lists all conditions that must be met before an action.
1. An action step describes an action to be carried out by the reader.
> Shows a successful interim result.
2. Further action step.
>> The results shows the result of the action.
1.2 Target audience
n
This document is aimed at trained technicians, who have been certified by
the manufacturer after taking part in trainings and safety trainings.
n
The installation, as well as inspection, maintenance and repair work, may
only be carried out by trained technicians.
n
It is advisable to only have inspection, maintenance and repair work car-
ried out by technicians authorized by the manufacturer.
n
The unit must not be used, cleaned or maintained by children. The unit is
not a toy. It must not be used as a toy even under supervision.
To Next Page
Loading...
Need help?
General
