8 | iZoneControl
Original instructions for use 55 / 100
8.2.3 Dividing the pan into zones
You can also divide a pan into zones without working with pan divisions. The division is temporary and is
overwritten as soon as a pan distribution is assigned to the pan.
1. Select a pan.
2. In the menu bar, press this button:
3. Tap an area within the pan.
> That area will be converted into a zone.
4. To confirm the zone, press the button:
5. To expand the zone, press this button:
6. Press this button:
7. Tap the additional areas of the pan you would like to include.
> The zone will be expanded accordingly.
8. To confirm the zone, press the button:
> The zone is confirmed.
9. To add another zone, tap a part of the pan that has not yet been assigned to a zone.
10. To delete a confirmed zone, press this button:
11. Press this button:
To Next Page
Loading...
