Rational iVario 2-XS - Service; 11.10.1 Information on the Unit Type; 11.10.2 Software Update Info; 11.10.3 Installed Software Version

11 | Settings
Original instructions for use 73 / 100
11.10 Service
1. Press this button:
2. Press this button: Service
The following information is available:
n
Information on cooking system model/software version
n
Serial number information
n
Hotline - Chef [}87]
n
Hotline - Service [}87]
n
Service level
This function is only available to RATIONAL service partners.
n
Software update info [}73]
n
Installed software version [}73]
n
Service messages of the last 14 days
n
Open source licenses .
11.10.1 Information on the unit type
Identifying information for your unit and the current software version are shown here.
11.10.2 Software update info
Here, you can see which software version is installed on your unit. If you have connected your unit with
ConnectedCooking and activated the function Download software updates automatically, the software updates
are made available automatically. More information is available here: Run software updates automatically [}80] If
a software update is available, the current software version is shown and the Start installation button is active.
1. Press this button: Start installation
>> The software update is carried out and the unit is rebooted.
11.10.3 Installed software version
Here, you will find all information on the installed software version and installed help packages.
11.11 ConnectedCooking
1. Press this button:
2. Press this button: ConnectedCooking
To learn how to connect your cooking system to ConnectedCooking and discover the available functions, go here:
ConnectedCooking [}79]
When your cooking system is connected to ConnectedCooking, you have the following setting options.
Connect automatically
If your cooking system loses network connectivity, the unit will automatically reconnect to ConnectedCooking
once connectivity is restored. If you do not want this, you can deactivate the function.
1. Press this button: ON or OFF
>> Your cooking system will disconnect from ConnectedCooking when you press OFF . When you press ON,
your cooking system will automatically re-connect to ConnectedCooking
Log off
You can log a cooking system off ConnectedCooking at any time. Connection details will be deleted. To re-
connect the cooking system to ConnectedCooking, you will need to register it again.
1. Press this button: