9 | Programming mode
60 / 100 Original instructions for use
5. To edit a cooking step, press the button:
> The cooking parameters and additional functions available for that operating mode will be displayed.
1. Adjust the cooking step as desired.
2. To save your changes, press this button:
Saving a program
1. To give the profile a name, press the button:
2. Enter a name.
3. To save your program, press the button:
>> The system will check the program. If all cooking parameters are fully defined and logically organized, the
program will be saved and added to the list of available programs.
>> If the program contains an error, that section of the program will be marked. Fix the error before saving the
program again.
9.3 Creating an intelligent program
On intelligent cooking paths, you can only adjust the cooking parameters - it is not possible to re-sequence the
individual cooking steps.
To Next Page
Loading...
