9 | Programming mode
58 / 100 Original instructions for use
9 Programming mode
You can create, save, and manage your own manual programs [}59], pan allocations [}59], pan distributions
[}59]intelligent cooking paths [}60] and shopping carts [}58]. You can choose from among any of the
available manual operating modes [}40], intelligent cooking paths [}27] and pre-programmed shopping carts.
Create new program
Manual operating modes
Sort alphabetically
Intelligent cooking modes
iZoneControl
Favorites
9.1 Programming shopping carts
1. In the menu bar, press this button:
2. Press this button:+ New element
3. Press this button:
4. Press this button:
5. To add intelligent cooking paths to the shopping cart, press this button:
> All intelligent cooking paths will be displayed.
6. Scroll through the list or select a cooking mode and then tap the cooking path you want to add.
> The cooking path is marked and added to the shopping cart. You can also check whether cooking paths can
be combined by pressing and holding the selected cooking path for a few seconds. A green check mark
indicates that applications can be combined.
7. To add previously saved programs to the shopping cart, press this button:
> All programs will be displayed.
8. Scroll through the list or select manual or intelligent programs, and then tap the program you want to add.
> The cooking path is marked and added to the shopping cart.
Reviewing shopping carts
1. To review the shopping cart, press this button:
> All selected intelligent cooking paths and programs will be displayed.
2. To delete an element from the shopping cart, press this button:
Saving a shopping cart
1. To give the shopping cart a name, press this button:
2. Enter a name.
To Next Page
Loading...
