4 | Transport
80.06.231_iVarioProL-iVarioProXL_IM_en-GB 21 / 72
2. If necessary, cut out perforated areas in the box so that you can slide the
unit off the pallet.
3. Lift up the unit on the left side.
4. Pull the unit to the end along the feet guides in the box and set aside the left
side of the unit.
5. Lift up the unit on the right side and remove the pallet.
> The shipping pallet is removed.
6. Lift the unit at the lifting points and transport it to the intended installation
surface.
To Next Page
Loading...
