6 | Electrical connection
42 / 72 80.06.231_iVarioProL-iVarioProXL_IM_en-GB
2. Screw in the 2 screws behind the cover on the front of the unit.
>> The electrical compartment is closed and protected against the penetration
of water and humidity.
6.7 Power ratings of different voltage types
Maximum connection voltage
n
Maximum permissible tolerance for the input voltage: - 10% to 10%
n
The unit can be used with frequencies of 50 Hz and 60 Hz without tech-
nical modifications.
NOTICE
Connection values for the Balanced Power option
Note that the connection values for units with the Balanced Power option
differ. The option is only available for voltage type 3 NAC 400 V.
WARNING
Risk of fire when using an incorrect conductor cross-section
The specified values for the conductor cross-section refer to a maximum
power cable length of 2 m [78 3/4 Inch].
To Next Page
Loading...
