4 | Transport
20 / 72 80.06.231_iVarioProL-iVarioProXL_IM_en-GB
Unit without substructure
4.2 Transport without pallet
NOTICE
Improper transport
Do not push the unit to the intended installation location.
The unit feet may be damaged.
Transport the unit according to this manual.
NOTICE
Risk of damage if lifted incorrectly
Only lift the unit at the lifting points provided.
Do not lift the unit by the side wall of the electrical component.
The manufacturer recommends that the unit be transported with cross straps.
a The packaging material is removed.
a The cross straps are ready for use.
1. Place the straps around the feet of the unit.
To Next Page
Loading...
