11 | Options
64 / 72 80.06.231_iVarioProL-iVarioProXL_IM_en-GB
7. The thread of the height-adjustable feet is equipped with a 5mm hexagon
socket at the top end. The unit can be levelled by turning it clockwise. To
level the unit, follow the instructions from chapter 5 “Setting up”. Tighten
the lock nut once you have set the correct height (step 5).
8. Close the insides of the substructure.
9. Apply silicone to the surrounding area of the feet on the substructure of
the unit.
10. Screw the cover back on to the inside of the substructure.
>> The unit was levelled on a plinth and with height-adjustable feet.
11.2 Storage space
The storage space is supplied assembled and is attached to the unit and the
substructure with screws.
NOTICE
Storage space is overloaded
Adhere to the maximum load of 30 kg per storage compartment.
Weight
Unit size L XL
kg [lbs] 20 [44,1] 26,8 [59,1]
To Next Page
Loading...
