6 | Electrical connection
80.06.231_iVarioProL-iVarioProXL_IM_en-GB 37 / 72
The electrical compartment is located below the control panel.
a The unit is standing on its intended installation surface.
a The unit top cover is closed.
a A cross-headed screwdriver is ready for use.
a All power sources are switched off by way of an external circuit breaker.
a To protect the control panel against scratching and damage, there is a pro-
tective layer on the pan lid, for example cardboard or bubble wrap.
1. Open the cover on the front of the unit and remove the 2 screws with the
crosstip screwdriver.
To Next Page
Loading...
