8 | Water connection
80.06.231_iVarioProL-iVarioProXL_IM_en-GB 49 / 72
The water connection is on the rear of the unit.
a The water hose meets the hygiene requirements for drinking water hoses in
your country.
a Safety devices, such as backflow prevention devices or CA system separat-
ors, have been installed in the inlet to the water tap.
a Line for shared cold water connection: 3/4 Inch
a Water hardness: at least 4°dH
1. Connect the supplied water hose to the water inlet of the unit.
2. Open the water tap.
>> The water inlet is connected.
To Next Page
Loading...
