11 | Options
56 / 72 80.06.231_iVarioProL-iVarioProXL_IM_en-GB
After the work has been carried out, reconnect them in accordance with the
instructions.
When the unit returns to its original position, make sure it is level.
Apply the parking brakes.
a The castors discs kit is ready for use.
1. Unscrew the plastic feet on the respective side.
2. Lift the unit on one side at a time.
3. Place the discs on the castors.
4. Screw the castors with the parking brake on the front of the unit and the
castors without the parking brake on the rear.
>> The castors are screwed to the unit.
Article number: Kit with 4 castors 60.71.267
Secure the unit with castors against slipping
To Next Page
Loading...
