11 | Options
58 / 72 80.06.231_iVarioProL-iVarioProXL_IM_en-GB
n
Minimum base depth: 650 mm [25 5/8 inches] (tilt protection required)
n
Standard base depth: 750 mm [29 9/16 inches] (without tilt protection
possible)
750 mm
[29 9/16 Inch]
650 mm
[25 5/8 Inch]
Secure the unit against tipping
The following attachment variants are possible:
n
Attachment with grub screws to the base
n
Fastening with brackets to the base or on the wall
Fixing with threaded pins in the base
Hole distances in the substructure of the unit:
Width mm [inches] x Depth mm [inches] y
L 865 [34]
650 [25 5/8]
XL 1199 [47 1/4]
To Next Page
Loading...
