276823346-R3
ERVICE
S
3.1-4 View Current Calibration
Settings (continued)
8 The following values will show on the display in
sequence:
A Unit type used for calibration
B Gravity value
C Zero calibration value and AD value.
D Weight calibration value(s) and AD values.
NOTE: If one weight was used for weight
calibration, "Weight 2" and "Weight 3" will show
zero for weight on the display.
FK0257.eps
9 After the sequence is performed, the display will show
"FC_bE".
Unit type – lb or kg Gravity Value Zero Calibration Value
Weight Calibration 1,
Weight value
Weight Calibration 1,
AD value
Weight Calibration 2,
AD value
Weight Calibration 3,
AD value Number of Calibration Points
Weight Calibration 2,
Weigh value
Weight Calibration 3,
Weigh value
Zero Calibration AD Value
A B
D
C
10 To exit, press the "On/Off" button two times.
9
10
To Next Page
Loading...
