PROGRAM YOUR OWN BATCH COMMAND:
To program your own Batch Command, enter a sequence of key commands
and/or mouse click and menu selection QuickLIst items to create a custom
Batch Command. When finished, use the SAVE button and locate your saved
Batch Command within the USER tab of the QuickList menu.
RECORD YOUR OWN BATCH COMMAND:
Users can also use the “Record” feature to record and save their own custom
Key Command, Menu Selection and Mouse-Click Batch Commands. To record,
push and hold on an empty Batch Command and hit the “Record” button.
Perform the sequence you wish to set to the button and once completed, hit
the “record” button again. A window will appear to be able to Name the new
To Next Page
Loading...
