Raven SCS 440 User Manual

4
Manual No. 016-0159-822 Rev E 25
INSTALLATION
turned OFF, the system will continue to draw 0.25 milliamperes of current to maintain information
stored in the console computer, draining the battery.
1. Route the power wire on the console control cable to the 12 VDC battery and connect it to the positive (+)
battery terminal.
2. Route the ground wire on the console control cable to the 12 VDC battery and connect it to the negative (-)
battery terminal.
IMPORTANT: Do not connect the power and ground wires to the starter.

Raven SCS 440 Specifications

General

Brand	Raven
Model	SCS 440
Category	Recording Equipment
Language	English