CHAPTER
2
Manual No. 016-0159-822 Rev E 3
CHAPTER 2
INTRODUCTION
INTRODUCTION
Congratulations on your purchase of the Raven SCS (Sprayer Control System) 440 Serial Interface! The Raven SCS
440 is designed to provide uniformity of spray applications, regardless of the vehicle’s speed. Utilizing a computer-
based console, a speed sensor, a flow meter, and a control valve, the SCS 440 also functions as an area monitor,
speed monitor, and volume totalizer.
The operator sets the target volume area to be applied, and the SCS 440 automatically maintains the flow. A
manual override switch allows the operator to manually control the flow for spot-spraying. The actual volume per
area being applied is displayed at all times on the console.
NOTICE
The performance of the SCS 440 relies on the
proper installation and preventative maintenance
of the system and the sprayer. Review this
Installation & Service Manual thoroughly before
operating the system.
To Next Page
Loading...
