Guidance Screens and Widgets: 147
GUIDANCE SCREENS AND WIDGETS
5. Press the Add Node in the selected chain field to add other bins to the product.
6. Select the advanced method for bin switching. This can either be done when the Bin Level sensor alarm is
triggered, when there an empty tank, or a low tank alarm is trigged.
7. Repeat step 3 through step 6 for each additional chain. A minimum of four products/nodes is required to have
multiple chains.
BIN CHAIN JOB WIDGETS
To reset the chain to the first link, press the left half of the Bin Chain button.
To activate or deactivate cleanout, press the right half of the Bin Chain button. Cleanout is only available after the
chain has completed with the advance method detected for all links in the chain.
To open the Settings page, long press the bin chain button. Adjust the settings as desired.
Product - Change the product.
Reset Bin
Chain
Button
Cleanout
Settings (Long Press)
To Next Page
Loading...
