Raymarine Dragonfly - Page 61

4.SelectYestoconrm,orNotocancel.
Erasingallwaypointsfromthesystem
Note:Thefollowingprocedurepermanentlydeletesall
Waypointsfromthedisplay.BEFOREproceeding,ensurethat
youbackupanydatathatyouwanttokeepontoamemory
card.
FromtheTools&Settingspage:
1.SelectBackup&Reset.
2.SelectErasefromSystem.
3.SelectEraseWaypointsfromSystem.
Aconrmationdialogisdisplayed.
4.SelectYestoconrm.
Waypointsearch
Thewaypointsearchfeatureallowsyoutosearchforwaypoints
onyoursystem.
ThesearchfeatureisavailablebyselectingSearchfromthe
Waypointslist.
Waypointscanbesearchedforby:
•Nameorkeyword
•Symbol
•Area
Fromthesearchresultsyoucaneraseallthewaypointsinthe
searchlist,movethemtoanexistingornewwaypointgroupor
assignallofthewaypointsthesamewaypointsymbol.
Searchingforwaypointsbynameorkeyword
Waypointscanbesearchedforbynameorkeyword.
FromtheWaypointslist:
1.SelectSearch.
Thesearchpageisdisplayed.
2.Usetheon-screenkeyboardtoenterthewaypointnameor
keyword.
3.SelectSearch.
Thesearchresultsaredisplayed.
4.SelectEraseWptstoerasethelistofwaypointsfromyour
system,or
5.SelectMoveWptstomovethewaypointstoanewor
existinggroup,or
6.SelectAssignSymboltoassignanewsymboltoallthe
waypointsinthesearchresultslist.
Youcanalsoselectawaypointfromthelisttoviewitsdetails,or
ifaccessedfromtheChartapplicationsetagotoordisplaythe
waypointintheChartapplication.
Searchingforwaypointsbysymbol
Waypointscanbesearchedforbywaypointsymbol.
FromtheWaypointslist:
1.SelectSearch.
Thesearchpageisdisplayed.
2.SelectSymbol.
Thewaypointssymbollistisdisplayed.
3.Selectthesymbolthatisassignedtothewaypoint(s)you
wanttosearchfor.
Alistofallwaypointsusingtheselectedsymbolisdisplayed.
4.SelectEraseWptstoerasethelistofwaypointsfromyour
system,or
5.SelectMoveWptstomovethewaypointstoanewor
existinggroup,or
6.SelectAssignSymboltoassignanewsymboltoallthe
waypointsinthesearchresultslist.
Youcanalsoselectawaypointfromthelisttoviewitsdetails,or
ifaccessedfromtheChartapplicationsetagotoordisplaythe
waypointintheChartapplication.
Searchingforwaypointsbyarea
WaypointscanbesearchedforbyselectinganareaintheChart
application.
FromtheChartapplication:
1.SelectMenu.
2.SelectMyData.
3.SelectWaypoints.
Thewaypointslistisdisplayed.
4.SelectSearch.
Thesearchpageisdisplayed.
5.SelectArea.
TheChartapplicationisdisplayedwiththeareasearchmenu
open.
6.Selectthelocationfortherstcornerpointofthesearcharea.
7.Selectthelocationfortheoppositecornerofthesearcharea.
Aboxisdrawnonthescreenwhichcoverstheselectedarea.
WaypointsandTracks
61