CreatingaVRM/EBLontheradardisplay
Fromtheradarapplication:
1.Selectatargetonscreen.
2.PresstheOkbutton.
Theradarcontextmenuisdisplayed.
3.SelectPlaceVRM/EBL.
4.UsingthejoystickadjusttheVRM/EBLtotherequiredbearing
andrange.
5.PresstheOkbuttontosavethesettings.
Note:TherstVRM/EBLwillbeplacedatalocationof1/3of
thecurrentrangeand030°relativetoyourvessel’shead.Ifthis
settingisadjusted,thedisplaywillretaintheadjustmentsanduse
themwhentheVRM/EBLisnextenabled.
CreatingaVRM/EBLontheradardisplayusing
touch
Fromtheradarapplication:
1.Selectandholdontherequiredtarget.
Theradarcontextmenuisdisplayed.
2.SelectPlaceVRM/EBL.
3.Selecttherequiredbearingandrange.
4.PresstheOkbuttontosavethesettings.
Note:TherstVRM/EBLwillbeplacedatalocationof1/3of
thecurrentrangeand030°relativetoyourvessel’shead.Ifthis
settingisadjusted,thedisplaywillretaintheadjustmentsanduse
themwhentheVRM/EBLisnextenabled.
CreatingaoatingVRM/EBLontheradar
display
FromtheradarapplicationwithaVRM/EBLalreadycreated:
1.PositionthecursorovertheVRM/EBL.
2.PresstheOkbutton.
Theradarcontextmenuisdisplayed.
3.UsetheRotaryControltoselectFloatCentre.
4.PresstheOkbutton.
5.Usingthejoystick,movethecenterpositionofthecircletothe
desiredposition.
6.PresstheOkbuttontoconrmthenewposition.
Note:WhencreatingtherstVRM/EBL,itwillbeplacedata
locationof1/3ofthecurrentrangeand030°relativetoyour
vessel’shead.Ifthissettingisadjusted,thedisplaywillretainthe
adjustmentsandusethemwhentheVRM/EBLisnextenabled.
CreatingaoatingVRM/EBLontheradar
displayusingtouch
FromtheradarapplicationwithaVRM/EBLalreadycreated:
1.PressandholdontheVRM/EBL.
Theradarcontextmenuisdisplayed.
2.SelectFloatCentre.
3.PresstheOkbutton.
4.Selectthedesiredlocationforthecenterposition.
5.PresstheOkbuttontoconrmthenewposition.
Note:WhencreatingtherstVRM/EBL,itwillbeplacedata
locationof1/3ofthecurrentrangeand030°relativetoyour
vessel’shead.Ifthissettingisadjusted,thedisplaywillretainthe
adjustmentsandusethemwhentheVRM/EBLisnextenabled.
UnoatingaVRM/EBLontheradardisplay
Fromtheradarapplication:
1.PositionthecursorovertheVRM/EBL.
162e7/e7D—Userreference